Whar's new 2006

- Section "Shelfs drawers pipes" New parameters for drawers - " Distance on right " and " Distance left ". They allow to oprerator to change their sizes and position.

-Section"End panels position" - Added parameter "Edgeband on panels front" for each one.

- Added second "Decorative front". Created opportunity for cutting of round holes in this two elements.

-Created opportunity for generating of units with unique element nomenclatures and layers. Uses an automatic addition of the textual code, entered by the operator, to their names.

Operations 3D Element - pipe, Profile и Grid - created opportunity to save the created three-dimensional bodies with the purpose of their use in the current project

- Section Position of floor - Added new options - Distance on left, Distance on right.

- Section Position of ceiling - Added new options - Distance on left, Distance on right.

- Added option Ceiling on top for construction Floor and ceiling between panels.

- The element nomenclature Stand:floor and ceiling is replaced with Stand:floor and new is added : Stand: ceiling

- The seen countries of a back are reveted with edgeband. For edgebands creates element nomenclature for calculation of the material on elements.

-Rounded stand -Created opportunity for generating of bases with chamfered shoulders.As length of shoulders are used entered on default values.

-Added generating of plinths on a worktop. The element nomenclature creates too.

-Chamfered stand - Generate element nomenclatures for bases, worktop and edgeband to them.

- Save and loading of templates. The structure is similar to this in the module Cabinet.

- Depth and Length of leg.
- Option Lifts elements with the height of legs - Allows to generate desks and other tables.

Design Sintez - Doors v.3.50.6 - model DF - Generates an element nomenclature for formation of the prices, similar as the others models of doors.

Design Sintez - Stands v. 1.50.3, Cases for sinks v. 1.40.1 - Eliminated wrong definition of Deviation on X of a nomenclature element Worktop.

Design Sintez - Open project FORM v.1.41.2 - When makes an export of the project , it saves (if the project is open) and makes its copy in an Export folder. The purpose is saving of its content for its next opening.

Design Sintez - Add units v. 1.89.2 - During addition of units from libraries in a premise(room) are priority accepted entered values for Position ((and Fixes on Z too), irrespective of the option The automatic control for capacity of units in premise is active.

Design Sintez - Parameters of room v.2.80.5-When the resolution of the screen of the monitor is more than 700pix (on vertical), form of the module increases automatically. The purpose is constant visibility of the full list with parameters of additional elements (windows)

Design Sintez - Open project FORM v.1.41.3 - Operation Export of project - When has an entered name of already existing export file (folder), the names of the projectsloads in the export list automatically.

Design Sintez - Light sources - user's system v. 1.04.:

1. The size of a lamp is set on 12 cm. by default
2. The size of spotlight is set on 20ñì. by default.
3. Supposes intensity of standard light up to 100 (100 %)
4. The colour of standard light is set white by default.

1. Allows the Export and Import of projects from and on disk devices, different of " C: / ".
2. At import of the project with overwriting (deleting) of the existing in system (with the identical names) correctly deletes the name of existing from the lists.

Design Sintez - Correction of unit v. 1.00.1 - When unit is copied (using operation Copying of unit), at its correction (operation Correction of unit) don't load the sizes of original unit , whence it is copied. Load the current sizes of the created copy.

December 2006

Addition	Design Sintez - module Libraries with textures v. 2.40 - Added to library 200 textures. Their total number became 2700. - Updated groups with textures Landscapes и Posters. - Created new group Urban landscapes.
Addition	Design Sintez - module Additional elements v. 3.10 - Element Arch - Added new models (2)
Addition	Design Sintez - module Worktop v. 3.62 - New parameter "Distance behind. Its valuesets the position of worktop and plinth in relation to a cabinet back , on which they lay. The option allows the operator to generate a worktop so between a cabinet back and room wall there was an empty space covered with a worktop. The option is active only for automatic generating.
Addition	Design Sintez - module Stands v. 2.10 - Created new parameter - "Distance behind" for worktop and plinth. It sets the position of worktop and plinth to a case back. The option allows the operator to generate angurlar stands with empty distance between a stand back and room wall, covered by a worktop .
Addition	Design Sintez - module Cabinet v. 5.86 - Section "Shelfs drawers pipes" New parameters for drawers - " Distance on right " and " Distance left ". They allow to oprerator to change their sizes and position. -Section"End panels position" - Added parameter "Edgeband on panels front" for each one. - Section"Ceilling position" - New parameter "edgeband in front". - Section"Floor position" - Added new parameters "edgeband in front" and "Edgeband on back". - Section "Distance of partitions" - new option "Edgeband on partitions front" for each partition. - Added second "Decorative front". Created opportunity for cutting of round holes in this two elements. - Section "Blends under ceilling" added new option "The blends are between partitions"

November 2006

Addition	Design Sintez module Units test v. 1.80 - New tests: - Duplicated records in Units Register and Archival - Test for interrupted nomenclatures - Restoration of the projects lists
Addition	Design Sintez - module Automatic dimensioning of units in the project v. 2.00 - New 3D way for dimensioning of units in the project - "In view front for inclusion of perspective"
Addition	Design Sintez - module Group addition and deleting of units in the project v. 3.50 - Automatic calculation of the sizes and the positions of doors for angular cabinets. Uses an option "Fronts"
Addition	Design Sintez - Addititional module Cut Base PRO v. 1.62 - In Parameters and controls for Automatic and Manual cutting - created opportunity for a choice of a unit of measure (m., cm, mm.) for dimensioning of the cutted details on the sheet.
Addition	Design Sintez - module Sink casess v.1.80 - Added new parameter Distance behind - Sets a position of a worktop and plinth in relation to a case back. The option allows the operator to generate sink cases with covered with worktop distance between the case back and wall.

October 2006

Addition	Design Sintez - module Cabinet v.5.50 - New element in case design - Decorative front - New option Dimensioning . The working drawing generates in a new file.
NEW	Design Sintez - new module Addition and correction of 2D texts in the project v. 1 The module is intended for a fast and easy insertion of 2D texts in the project and them correctiing. Allows the operator to create and to use libraries with texts.
Addition	Design Sintez - additional module Cut Base PRO v. 1.60 Automatic cutting: - Shows a list with elements for cutting with an opportunity for rotation of the sizes of details. The purpose is more optimum allocation of elements on a sheet. Specified: Total number of elements and necessary quantity of sheets.

September 2006

Addition	Design Sintez - module Cabinet v.5.30: -Created opportunity for generating of units with unique element nomenclatures and layers. Uses an automatic addition of the textual code, entered by the operator, to their names.
Addition	Design Sintez - module Group addition and deleting of units in the project v. 3.30 - Section Fronts- Added new option - 1 Door. The option automatically calculates a position and dimensions of 1 door to the chosen case depending on up scole height (individual or common) and from height of legs. For cases for sinks consideres the worktop completeness too.
Addition	Design Sintez -additional module New Base 3.30 - в 3D Elements -Profiles created new models - 18 and 26. - в 3D Elements - Pipes added new profile for pipe. - Created new group 3D Elements - Decorations
Addition	Design Sintez - module Room generating v. 3.30 - Doors generating - created opportunity for their connecting with different layers for each door. Generating of door cills.

August 2006

Addition	Design Sintez - module Bases v. 1.40 - New option Does not lift units in the project. It is used when cases are generated with legs and they should not be lifted with height of base.
Addition	Design Sintez - module Cabinet v.4.91 - Section Position of countries - new parameters: Edgeband on sides (for left and right) below and above.
Addition	Design Sintez - module Doors 3.80 - Added new door panel for doors model DF.
Addition	Design Sintez - additional module New Base 2.60 - 3D Elements - Grid Added new model with 2 submodels: - 3D Elements - Profile Added new models - 24 and 25.

July 2006
Addition	Design Sintez - additional module New Base 2.50 Operations 3D Element - pipe, Profile и Grid - created opportunity to save the created three-dimensional bodies with the purpose of their use in the current project
Addition	Design Sintez - module Open project v. 1.50 - Transforms archival "BAK" files of the projects in working files DWG.
Addition	Design Sintez - module Additional elements v. 3.00 - Created opportunity for correction of the generated additional elements (module Correction of unit)
Addition	Design Sintez - module Worktops v. 3.60 - Added automatic positioning of linear worktops (from 2 points). - Added generating of element nomenclatures for worktops connectors.

June 2006

Addition	Design Sintez - module Blinds - curtains v. 2.00 - Generates vertical blinds.
Addition	В Design Sintez - module Angular cabinet v. 1.30 - New additional construction for Floor and ceiling between panels.
Addition	Design Sintez - module Units test v. 1.50 - -New test "Untied Nomenclature units-Elements with units (blocks)" -Checks and "Clears" nomenclatures of the program with the purpose to speed-up its work.
Addition	Design Sintez - module Libraries with textures v. 2.10 - - Added new textures for interior doors and carpets. Total number in the main library - 2500.
Addition	Design Sintez - module Sink cases v. 1.70 -New parameters for position of sink - left and right for all models. New parameters Distance on left, Distance on right.
Addition	Design Sintez - module Cabinet v. 4.90 - Section Position of floor - Added new options - Distance on left, Distance on right. - Section Position of ceiling - Added new options - Distance on left, Distance on right. - Created opportunity for creation of user's groups of templates.

May 2006
Addition	Design Sintez - Library of units - new 22 units (blocks)
Addition	Design Sintez - module Cabinet v. 4.60, Angular cabinet v. 1.21.5, Bottom cases v. 1.51.1, Cases for sinks v. 1.60.1, Stands v. 2.00 - Added 50 templates.
Addition	Design Sintez - module Doors v. 3.70 - -New submodels of door D4 - New profile and panel - Model D1 - Framed MDF with panel. The model is derived from the basic model.
Addition	Design Sintez - module Add units v.2.00 - Direct visualization in the form for loading and execution (correction) of the saved in program templates from modules generating polyelement units.
Addition	Design Sintez - module Angular cabinet v. 1.21.5, Cases for sinks v. 1.60.1 - Added system for save and loading of templates. The system is similar to this in the module Cabinet.
Addition	Design Sintez - module Cabinet v. 4.60 - added new options: -section Distance of partitions - Distance below and Distance from above for each of partitions in a case. - Distance in front for each of partitions in a case. The entered value for this parameter automatically sets for distance of shelves, too. - section Parameters of shelves - parameters Distance on right and from left(for each shelf in the section personally). - parameter Distance in front (for each shelf in the section personally). - parameter Layer of shelves for material and edgeband (for each shelf in the section personally). - added options for input of names of nomenclature elements for a material (for everyone shelf in the section personally) - Parameters of the countries: Distance below и Distance from above
Addition	Design Sintez - module Libraries with textures v. 2.10 - New library "Interior doors". The library contains 60 textures for needs of the module Generating of room v. 3.10 ( generating of doors). The total number of textures in the main library is 2360.
Addition	Design Sintez - modules Sink cases v. 1.60 - New parameters: - For a floor - Distance below - For legs - Lifts elements with the height of legs The parameters set in modules by default.
Addition	Design Sintez - module Stands v.2.00 - Added option Ceiling on top for construction Floor and ceiling between panels. - The element nomenclature Stand:floor and ceiling is replaced with Stand:floor and new is added : Stand: ceiling - The seen countries of a back are reveted with edgeband. For edgebands creates element nomenclature for calculation of the material on elements. -Rounded stand -Created opportunity for generating of bases with chamfered shoulders.As length of shoulders are used entered on default values. -Added generating of plinths on a worktop. The element nomenclature creates too. -Chamfered stand - Generate element nomenclatures for bases, worktop and edgeband to them. - Save and loading of templates. The structure is similar to this in the module Cabinet.

April 2006
Addition	Design Sintez - module Cabinet v. 3.90, and Cases for sinks v. 1.50 - construction Floor and ceiling between walls: added options Lifts the LEFT panel on a floor and Lifts the RIGHT panel on a floor.
Addition	Design Sintez - module Generating of room v. 3.10-Created system for generating of additional premises(rooms) or walls to basic room. An opportunity for addition of windows, holes and doors to them. The mode of work with options and parameters in the module is kept.
Addition	Design Sintez - module Movement v. 2.10 - Automatic assignment and connecting of the used textures from the original project to layers in the current VIEW project after closing the module.
Addition	Design Sintez - module Group addition and deleting of units in the project v. 3.21 - Added option for automatic setting for a design " 2 doors " for generating to a sellected case (section Front)
Addition	Design Sintez - module Generating of room v. 3.01 - Created opportunity for the operator to define a position of doors in frameworks.
Addition	Design Sintez - module Generating of room v. 3.00- Added Automatic creation of frameworks and doors in holes of walls as additional elements. They have its own layers for rendering.
Addition	Design Sintez -module Cabinet v. 3.85 - Section Position of countries - Added parameter Edgeband under the countries.
Addition	Design Sintez - module Generating of room v. 2.90 - Created opportunity for generating of ledges to the windows.
Addition	Design Sintez - module Additional elements v. 2.10 Added new element Arch with shoulders.
Addition	Design Sintez - module Additional elements v. 2.00 Time for loading of the module (form) is reduced to 80 %..
Addition	Design Sintez - Additional module New Base 2.48 In section 3D Elements - Profile is added new profile.
Addition	Design Sintez - Cabinet v. 3.85 - Created opportunity for a choice for generating of bases between the panels and partitions when is active an option Generates bases between partitions in the form Parameters of base.

March 2006
NEW	В Design Sintez - Additional module New Base 2.46 Module 3D Elements - Grids - Automatically creates 7 models of grids, sockets and decorative partitions.
Addition	Design Sintez - Additional module New Base 2.32 Section 3D Elements - Profiles Added 3 new profiles and 4 models of decorations with additional variants
Addition	Design Sintez - Cases for sinks v. 1.43 Added options for automatic positioning of sinks - in the left, right end of sink or in the centre for 2 models.
Addition	Design Sintez - Cases for sinks v. 1.42 Added option Generates the case of cabinet. When the option is switched off, generates only worktop and sink on it.
Addition	Design Sintez - Cabinet v. 3.84 Added 5 new models of legs. The total number of models for generating of cases is 8.
Addition	В Design Sintez - Cabinet v. 3.83, Stands v. 1.51, Bottom cases v. 1.31, Angular cases v. 1.21 Entered parameter by default "Distance of shelves front". The parameter is subordinated to parameter "Distance of partitions", which has priority and which concerns for modules Cabinet и Bottom cases. The value sets in the form Parameters and controls by default of the module Cabinet
Addition	Design Sintez - module Cabinet 3.82 Entered parameter for manual entering of position of legs on groups (left, right and in the centre). The existing structure for automatic positioning on base of the entered deviations for the left legs (only) is kept, too.
Addition	Design Sintez - module Cabinet 3.81 The material of bases is separated as different nomenclature from the countries of a case. Entered new parameter Completeness of material - base
Addition	в Design Sintez - module Cabinet 3.80 Added 3 new element nomenclatures for edgeband of bases: Case: edgeband on X - base, Case: edgeband on Y - base, Case: edgeband on Z - base when generates a case(cabinet). The reason for this purpose is the opportunity to set an own completeness of a material for base and its separating from a material for the countries (panels).
Addition	Design Sintez - module Cabinet 3.70 - Created opportunity for direct correction of the names of generated by the module element nomenclatures in the form " Parameters and controls by default " - When you save a template it saves together with the names of its element nomenclatures. It provides the uniqueness of element nomenclatures for the concrete template. - Names of elements - Created system that allows parallel usage of the current names of nomenclatures, set names by default or set of the base (system) names of elements.
Addition	Design Sintez - module Cabinet 3.60 -Added parameter Completeness of a material - floor, different from this for countries. Allows you to generate units with various applicability. - Added two new element nomenclatures for a floor: Edgeband on X, Edgeband on Y
Addition	Design Sintez - module Cabinet 3.50 The elements FLOOR and BASE and edgebads to them have different layers from the COUNTRIES. They register in the project their own names. This allows their connecting with another texture (different colour).

Addition	Design Sintez - module Cabinet 3.40 - Added new options: - Parameters of base - Generates bases between partitions - Position of floor - Lifts partitions with value DISTANCE BELOW and COMPLETENESS OF FLOOR
Addition	Design Sintez - module Cabinets 3.34 Created opportunity for generating of legs to cases when has not a generated FLOOR Added new options to parameters of legs: - Depth and Length of leg. - Option Lifts elements with the height of legs - Allows to generate desks and other tables.
NEW	Design Sintez - module Automatic measurement of units in the project v.1.00
Addition	Design Sintez - module Cabinet v. 3.33 -In " Parameters of base " is added the option "Lifts elements with height of base ". Allows to generate various models of Desks etc.
Addition	Design Sintez - module Cabinet v. 3.32 - When adds a base - added options Deviation From left and Deviation on right . The deviation inside relates only to a position of forward (frontal) and back base (in the previous versions of the module it was reflected on a position of the left and right base too)
Addition	Design Sintez - module Cabinet v. 3.31 - At design " Floor and ceiling between walls " is allowed entering of deviations for the countries inside.
Addition	Design Sintez - module Test of units v. 1.40 - Added new test (operation): Untied nomenclatures of units with projects .
Addition	Design Sintez - module Parameters of system v. 2.00 - Added new operation: Capacity of nomenclatures .
Addition	Design Sintez - The program is adapted for work with OpenOffice Calc - Program for opening of information in the tabular form. OpenOffice Calc is free alternative of Microsoft Excel . The adapted modules are: Archival Register of units v. 1.07, Register of units v. 1.38, Formation of price offer v. 1.26, Cutting PRO v. 1.51, Nomenclatures for formation of prices v.1.12, Layers in units v. 1.01.
Addition	Design Sintez - Parameters of system v.2.00 - Added parameter for a choice of Program for opening of information in the tabular form (Microsoft Excel or OpenOfficeCalc).

Addition	Design Sintez - Cases for sinks v.1.40 : Created opportunity for generating of Plinths together with a worktop. The completeness of a table-top is included in total height of a case (in the previous versions the sizes of a case has included only case of cabinets).
Addition	Design Sintez - Cabinets v.3.30 - Formation of multielement units - Option Position of back - added parameters: Distance on left, Distance on right. Allows to generate units with various applicability.
Addition	In Design Sintez - Cabinets v.3.22 - Added opportunity for record of the explanatory text to a template . The text is shown in a consequence when you specify a template in the list with templates (created opportunity for its correction ).
Addition	In Design Sintez - Open project FORM v. 1.41 - The operations Export of the project and Import of the project - the nomenclatures of the units, generated in them, are copied together with the projects .
Addition	In Design Sintez- Cabinets v.3.21 - Formation of multielement unit - created opportunity for visualization and viewing of templates of cabinets , using the icons (images) saved to them.
Addition	In Design Sintez - Cabinets v.3.20 - Formation of multielement unit - Added new parameters in Position of floor : Distance in front, Distance behind. Allows to generate units with various applicability.
Addition	In Design Sintez - Seen layers in project v.1.10 - Added new operations: Removes a mark of all layers Shows all layers in the project
Correction	Design Sintez - Doors v.3.50.6 - model DF - Generates an element nomenclature for formation of the prices, similar as the others models of doors. Design Sintez - Stands v. 1.50.3, Cases for sinks v. 1.40.1 - Eliminated wrong definition of Deviation on X of a nomenclature element Worktop. Design Sintez - Open project FORM v.1.41.2 - When makes an export of the project , it saves (if the project is open) and makes its copy in an Export folder. The purpose is saving of its content for its next opening. Design Sintez - Add units v. 1.89.2 - During addition of units from libraries in a premise(room) are priority accepted entered values for Position ((and Fixes on Z too), irrespective of the option The automatic control for capacity of units in premise is active. Design Sintez - Parameters of room v.2.80.5-When the resolution of the screen of the monitor is more than 700pix (on vertical), form of the module increases automatically. The purpose is constant visibility of the full list with parameters of additional elements (windows) Design Sintez - Open project FORM v.1.41.3 - Operation Export of project - When has an entered name of already existing export file (folder), the names of the projectsloads in the export list automatically. Design Sintez - Light sources - user's system v. 1.04.: 1. The size of a lamp is set on 12 cm. by default 2. The size of spotlight is set on 20ñì. by default. 3. Supposes intensity of standard light up to 100 (100 %) 4. The colour of standard light is set white by default. Design Sintez - Cabinets v. 3.10.2, Stands v. 1.50.2, Bottom cases v. 1.30.3 - Eliminated incorrect positioning of shelves and partitions at proportional distribution, when the unit is generated with bases and with legs simultaneously. Design Sintez - Open project FORM v. 1.40.5 - 1. Allows the Export and Import of projects from and on disk devices, different of " C: / ". 2. At import of the project with overwriting (deleting) of the existing in system (with the identical names) correctly deletes the name of existing from the lists. Design Sintez - At start of the module Rotation of unit 2D the current view does not change in View top when operation is activated from Vertical menu or Manager of operations and commands. Design Sintez - Correction of unit v. 1.00.1 - When unit is copied (using operation Copying of unit), at its correction (operation Correction of unit) don't load the sizes of original unit , whence it is copied. Load the current sizes of the created copy. New Base v. 2.25.1 - Saving of new unit - Added automatic check for presence of free capacity at saving of more units in Register of units and Archival regiser of units. Design Sintez - Cabinets v.3.21.1 - Generating of bases - eliminated mistake at record of a template file used at correction of unit or for opening of a template. Design Sintez - Cabinets v.3.21.2 - Corrected wrong record of parameter "Edgeband on back" at saving of a template file of unit (used at its correction too), which becomes a reason for wrong reading of parameters of system from the other modules.

Furniture design software DESIGN SINTEZ