Furniture design software DESIGN SINTEZGenerated multielement unitsAngular standsThe module generates
in and only for the current drawing
units -
stands. Creates and connects their element nomenclatures for
calculation of the materials. It is necessary for the price offer
formation and the cutting. The most part of options and parameters for
the stands' generating are similar to these in the module Cabinets. 
Enter all parameters: elements'
layers, their thickness, additional
elements, way of visualization. It is necessary to have the entered
record "TE"
with a unit of measure "package" in the Units register. It
will initialize the generated element nomenclatures in a consequence .
Enter the outer dimensions of the stand and its
construction. Choose
the model (Rounded
or Chamfered)
in the form. If you choose Chamfered,
enter
length of shoulders on X and Y. Specify an angle of rotation
(left or right). You can add baseboard, or legs (by
default 3). The stand can be
with a worktop, too
(for bottom stands).
Chamfered - depending on the way of linkage of the shoulders it is possible to generate 2 models. If you select the option Fillet chamfering, the connecting line between shoulders will get the form of an arch (radius of an arch is equal on to the half of the length of a the distance between shoulders). You can change the value of the radius. So you get more rounded or less rounded arch. The positive radiuses create concave stand, and negative - convex. If the option Fillet chamfering is not checked, then the area, which connects the two shoulders, will be a line. When stands have different length and depth, you probably would get disproportionate extension of the shoulders on X and on Y at their visualization. This disproportion does not reflect on the generated element nomenclature. You can generate rounded or chamfered baseboard to the rounded stands . If you want to generate an chamfered baseboard, select the option Chamfered in the dialogue form Baseboard. The positioning of stands, similar to the module Cabinets, makes in the drawing, depending on the present values of parameters in modules Rotation, Position and Parameters for control of capacity of the units in the room. The elliptic baseboard is not edgebanded. The edgebands
for a bottom, top and shelves at designs: are shown visually, but they don't
create element nomenclature.The rounded
baseboards
create element nomenclatures with a unit of measure "piece" .
Distance behind - The value sets the position of the worktop the cabinet back panel. The option allows the operator to generate angular stands with empty space between a stand's back panel and room wall, covered with a worktop . Section Craeate elements - Here are specified those elements of the unit which will be generated (bottom, top, back panel, end panel). The selected elements will be generated only. If you don't want to generate any element, uncheck its name.
|
||||||||||||
Main
page