|
Back distance -Set the top's distance from the cabinet back edge. Left Distance, Right Distance - Set the top deviation depending on its sizes.. The options Left edgeband and Right edgeband are active only for construction End panels overlap the bottom and top and inactive option Top above. In other cases edgeband adds automatically. Checkbox Saves distance and size of a detail and Scales the distance depending on the current cabinet dimension - These two options have mutually supplemented functions. Their combination will allow you to save the position and the size of additional details after changing the outer dimensions of the created unit. For example: We have a cabinet with sizes Lenght = 100cm., Height = 70 cm. and Depth = 50cm. and Top sizes Lenght = 100 cm., Depth = 50. We enter distances: Left distance = 10 cm. and Right distance = 5 cm. The result is an element 85 cm. long. Sellect the checkbox Saves distance and size of a detail for the Left distance. Mark the checkbox Scales the distance depending on the current cabinet dimension for Right distance.
Let's change the cabinet length on 150cm. Here what result is
received: If the option Scales the distance depending on the current cabinet dimension is checked for one distance only , then the size of the element and this distance will be changed proportionally on the edited cabinet sizes. For example: Let's generate a cabinet with depth 75cm. The depth of thå Top is 75 cm. Enter a value for front distance 10cm. and check the option Scales the distance depending on the current cabinet dimension. The element's depth becomes 65cm. Let's change the cabinet depth on 90 centimetres. The coefficient of the size changing will be 90/75= 1.2. The element front distance becomes 1.2*10=12cm., and its depth - 1.2*65 = 78 cm. If the checkbox Scales the distance depending on the current cabinet dimension is checked for 2 opposite distances, the scaling will be executed for these two distances and for the detail's size. For example: We have a cabinet with: Lenght = 100 cm., Left distance=5 cm. and Right distance = 5 cm. The element's lenght becomes 90cm. Let's change the cabinet length on 200 cm. The coefficient of the size changing will be 200/100=2. The entered distances become accordingly on 2*5=10 cm., and detail's length becomes 2*90=180 cm. The button Edit form opens a dialogue window for top parameters edition. The large number of parameters allows you to create various shapes for writing-table worktops, wardrobe tops etc. The edgeband on the ovalshaped areas creates its own element nomenclature. The filleting (chamfer ) begins from the four basic corners. Then you can use the intermediate points parameters. This is necessary for correct calculation of element nomenclatures. The possible deviation at calculation of the edgeband quantity for the rounded forms is 5-10 % (with positive or negative sign).
Cancels entered parameters - The button does values of all parameters 0, adjusting a rectangular form. Here you can create and save templates of various top shapes. Subsequently you can load them from the list. Enter the template name into a field taking place above the button Save design and press it. The new template adds to the list. To load an already existing configuration mark its name and press the button Load design. Press the buttton Preview to view the chosen design. For deleting a template specify it in the list and press the button Delete design. Scales all parameters depending on the cabinet current sizes automatically - Scales all sizes of the already existing designs automatically depending on a ratio of the original and the present cabinet sizes specified in the main form. The radiuses values are calculated depending on the new element linear sizes. The size correction and automatic scaling makes in the form " Top parameters". If you change the cabinet sizes in the main form in a consequence, you will receive a disproportionate form change. Press Set to save the made changes. Close the form to cancel them.
For
more stable cabinet construction you can generate one or two rails
under its
top (2 vertical, 2 horizontal, 1 horizontal +1 vertical or 1 vertical +
1 horizontal) either for each area
or in one area only. Select
an option Add rails and
specify whether there will be
edgebanded the internal edges of the rails (options Front
rail - back/ top edgeband and Back
rail - back/ top edgeband) and enter their Width. The rails
generate an own element nomenclature for a material (Cabinet: rails) and
edgeband (Cabinet rails'
front edgeband, Cabinet
rails' back edgeband,
Cabinet rails bottom edgeband and Cabinet rails top edgeband).
The common width for all rails sets into the field Width. You can enter a
personal width for each rail (front
and back) in every section,
too. Enter the new values into the fields front and back. This way you can edit rails' distances of the front and back
rail, too. The rails are between partitions - When this option is active, the the partitions divide the rails in separated sectors. For each segment creates an element nomenclature (for material and for edgeband).When this option is switched on, there is a possibility for personal definition of the elements' parameters for each area - in which area to be generated rails, the way of their turning (vertical or horizontal), as well as their distances Front and Back. The option allows to generate a cabinet with some partitions and rails between them (kitchen cabinets for example). Left and Right - They are active when an option The rails are between partitions is not checked. The positive values decrease the rail's length, and negative increase it.
|
Main
page