Furniture design sintez DESIGN SINTEZ

Cabinets -Generated multielement units

Baseboars - construction settings

baseboard

Baseboard-Raises the cabinet and adds baseboards under the cabinet's bottom, without changing its general sizes. Calculates again the element's sizes (their height) depending on the cabinet construction.

Left and Right - These options are active for construction The bottom and top overlap the end panels.

Each baseboard  (front, back, left and right) is an independent element of the cabinet. Their generating sets for each one separately by activating of respective options (Position inside, Left distance and Distance from the right). The left and right baseboards take the distance of  Baseboard 1 automatically.

Baseboard height: The value defines the baseboard height.

Left distance   and Distance from the right -These values define  the deviation of the baseboard in relation to the external cabinet sizes. The options allow you  to generate units with various applicability (for example: desks, tables etc.)

Position inside  - Sets a deviation, with which the baseboard moves inside to the most forward cabinet point. This deviation concerns only front and back baseboard   and does not change the position of the left and right baseboards.

Lifts elements with the baseboard height - The option is active by default.  If it is switched off and you have switched off the BOTTOM generating, the partitions and shelves will not be rised with the baseboard's height and will remain in the position, set by the operator. It allows you to generate desks with partial baseboards and partitions  down to the floor.

Generates baseboards between partitions - Adds  baseboards between the cabinet's partitions. The partitions reach the floor level of the cabinet. The option increases the range of the generated cabinets' constructions.
The generated baseboards connect automatically with a layer Cabinet baseboard material and their edgebands with a Cabinet baseboard edgeband layer. Their connecting with a different layer allows you to render them in a different colour from the cabinet panels. (window Parameters by default).

Grain direction - The section is enabled when the selected unit of measure for the baseboard is "sq.m.".Here are defined the initial sizes of details, which will be loaded in the list of details for cutting (nesting) in a window Elements for cutting and in export files to other nesting software (Cutting, Optimik etc.). The choice is made for details Cabinet baseboard. If the option On length is specified, the length of the baseboard becomes a length of a detail for cutting. The height of baseboard becomes height of a detail for cutting. If the option On height is checked, the lehgth of baseboard becomes a height of detail for cutting, and the partition's height becomes  length of the cutting detail. By default the option On length is checked.For example:  The baseboard is 50 cm long and the height is 10cm. If the option On length is checked we will receive detail with sizes 50x10. If the option On height is checked, the sizes of detail for cutting will be 10x50. By  default the option On length is active.

Rotation- When the option is checked the sizes of the detail for cutting will be given as allowed for rotation in the list Elements for cutting (module Cutting  of materials). The the state of the option affects to the export files to other applications for cutting (Optimik, Cutting, Giben, Plan IQ, Ardis, Holzher....), too. If the option is not checked, the detail can be  rotated only if this was specially set in the list of the elements.

Section Add baseboards between panels and partitions - This option allows you to define those panels and partitions, between which you want to add baseboard. It is active, when the option Generate baseboards between partitions is active. Select a section (Baseboard1, Baseboard2,Baseboard3 or Baseboard4 to choose an area for baseboard addition.
Creation of rounded and beveled   baseboard - This option exist only in case the base is common for the cabinet , i.e. it is not divided on different sectors by  the partitions. Possible variants for the shape of baseboard are: straight, fully rounded/beveled (left and right) and partially rounded/beveled (left and right), baseboard that is composed of one ore two straight sections + rounded/beveled sector. Positive radii create protuberant baseboard ,  zero – bevel ,and negative-concave.


rounded baseboard

At calculating the length of rounded baseboard sectors , it is possible to get deviation with positive or negative sign , which value depends on the set factor of protuberance of arc.

Insert legs


They raise the cabinet, keeping the external dimensions of the unit, which are specified into the fields LENGTH, HEIGHT and WIDTH. Decrease the elements sizes on height with the value of their height.  The kind of leg you choose from the list. Select the necessary to you model. You can see the image of the selected item in the field Preview of leg.

In the list are specified the legs' file names and their sizes (LENGTH, HEIGHT and WIDTH) in a view top.By default, the cabinets are generated with the legs of the same model. If you want to change a leg model, select it with left mouse button on its icon and select a new from the list Legs models.

Lifts elements with the height of legs -  Reduces the cabinet height and change the position and dimensions of all elements lying above the legs, with the value in the field Decreases cabinet case. If it is turned off, the elements of the cabinet (shelves, partitions, top) will be not raised with the legs' height and they will remain in their set position in the cabinet. Combining different models legs, combined with the use of this option allows the generation of desks and work tables with different shape and construction. See this example:

Example main window
Legs position
Example desk toptable

If you have entered different values  for height of the legs and baseboards, the height of the legs equalizes to the baseboard height automatically.

Raises baseboard - When option is active cabinet baseboard will raise up with the legs height together with the cabinet casework. Allows generation of units raised on steps (desks, cabinets, etc.) without legs height to equalize to base height.

Position inside - The cabinet legs take a position in the corners, and if is chosen an option 6 Legs, the  two of them occupy a position in the centre. The position of legs on groups can be set manually (for left, for right and for the central legs).  You have to enter a value  in centimeters into the fields On X, On Y for a position of the legs inside. Besides this each leg can have personal distances inside.The legs position can be specified directly in the drawing using small buttons to the right of fields for entering of distances. The left mouse click  on them hides a window temporarily and loads the working screen, in which you can define the position of each leg.

The distance for legs in the centre is calculated in relation to the end left cabinet point.

Each detail generated leg create own element nomenclature containing the name of the model. Thus each leg can be connected with different material in the module Price offer - Register of participating in the drawing elements.

ENMain page    DS User  guide