Furniture design software DESIGN SINTEZ

Generated multielement units

Sink cabinets

The module generates in and only for the current drawing units - sink cabinets. Creates and connects their element nomenclatures for materials' calculation. This is necessary for the price offer formation and cutting. Automatically adds a worktop and the chosen sink to the cabinet.  The most part of options and parameters are similar to these in the module Cabinets.

shkaf_za_miwka.jpg

Enter all parameters by default as: elements' layers, their thickness, additional elements, way of visualization. The parameters by default are set  in a similar way  as in module Cabinet. It is necessary to have the entered record "TD" with a unit of measure "package" in the Units register. 

  The module supports a system for saving and review of the saved templates (constructions). The already saved templates can be loaded again at any time. It is recommendatory to create templates for the most frequently used constructions. You can create and save an icon to the template  for preview. The icon saves in a folder C:\acad_pic\SHKAF_MIWKA_SHABLONI under a name of the painted template. The templates can be open directly from the module  Insert units (if they have a saved icon. Use the pictures - buttons for their loading in the right end of the form or use the module for generating of polyelement units.)

Always, when you add a sink to the cabinet, automatically generates a worktop, too.The worktop creates an element nomenclature with a unit of measure "l.m.". The names of element nomenclatures of the sink cabinets are necessary to differ from the other generated units in the program. 

Section  Construction settings - Bottom  - Allows to set the bottom position in relation to the cabinet's base point irrespective of the other elements' parameters.

To select a sink to the cabinet, press the left mouse button on its image. If you don't want to add a sink, check an option Don't place a sink. The sink,worktop and the generated case are joined in one unit.  The sink models can be placed as left, right and in the centre of the cabinet. The worktop generates automatically on the cabinet length   irrespective of the sizes of sink. 

Sizes of chosen sink -Allows to change the sizes of the chosen sink for building-in. The current values for the concrete sink are saved by default for the next start of the module. The original sink sizes are shown as help text for every one. You have to know, that when you change the original sizes of sinks, you change the sizes of their details proportionally, too. To restore the original sink sizes press the button Sets the original sink sizes. 

The base point of the generated unit is front bottom left, as in all other generated units (except doors).

Bilateral profile - The option rounds off the worktop of a sink cabinet on the two sides.

Add plinths -  Generates a plinth along the cabinet's back. Creates its own element nomenclature for the purposes of the prices' formation. The created element nomenclature for the plinth differ from the one created in the module Worktops.

The positioning of the sink cabinets, is similar to that in module Cabinets. It depends on the present values of the parameters in modules Rotation, Position and Parameters for control of capacity of the units in the room. 

Generate cabinet case - The option is active by default.  If it is not checked, then the worktop and sink will be generated only. If the option Doesn't  place a sink is checked, there will be generate only worktop.

Section Sink position  - Allows the automatic positioning of sinks in the left and right end of the cabinet or in its centre . The option is actual for all sinks' models. Use parameters Distance from the right and Left distance for change the sink's position (you can see them in the bottom right corner of a window). They sets the distance of sink from the respective cabinet ends.

Left distance and  Distance on the right - These parameters set the distance of the sink from the cabinet edges.

Sink position from a cabinet back panel - Sets the worktop's position and plinth in relation to a cabinet back panel. The option allows the operator to generate sink cabinets with worktop which cover the distance between the back panel and the room wall.

Addit. details - parameters - This section allows the operator to generate 2 additional elements to a sink cabinet. Here the mode of work is similar to that in the module Cabinet.

Rounding - Beveling of the worktop's ends - The button opens a dialog that allows you to change the form of the worktop ends. By default the form is rectangular. The entered radius  of rounding defines the  protruding of the rounded sector. The zero values create beveled sectors.

The Rounding/ Beveling can be executed simultaneously for left and for right side of the worktop. The option for changing of the front edges'  shape is active by default.  If you want to round/ bevel the back edges of the worktop, you have to check the options Chamfered in section Back for the concrete side.  

The options Rounds off the left side of the worktop and Rounds off the right side of the worktop automatically set a bilaterally rounded worktop (the parameters are in a mode by default).  The entered values in the sections Radius for rounding define the radius of the all 4 edges. The automatically loaded values of the parameters can be changed (just enter the new values into the fields).  The worktop shape can be made a rectangular or chamfered without rounding, too.

Sink cabinet worktop


 The edition of the cabinet's sizes with module "Change sizes of unit "  will obtain an disproportion of its elements and sink. To change the sizes, you have to generate the cabinet again  or to use the operation Unit correction.

ENMain page     DS User's guide