Furniture design software DESIGN SINTEZCorner cabinetThe module generates base and wall corner cabinets in two basic models: with a corner and with à chamfered part. Automatically creates and connects their element nomenclature for the purposes of price offer calculation and nesting. There is an opportunity for addition of a worktop and angular sink. More of the options and parameters of generating are similar by these in the modules Cabinets and Base cabinets. |
|
|
|
Before cabinet generating enter all parameters by default as: elements' layers, thickness of elements, additional elements, ways of visualization. They have a unit identifier "TY" in Units register with a unit of measure "package". You can use the operation Test of units (execute the test Incorrect records in Unit register and Archival.Identifiers of the generated units not found ) for automatic addition of identifiers of the generated units. The names of the element nomenclature of corner cabinets by default differ from the element nomenclature of other units. They can be made identical with names of the same elements for the base cabinets or sink cabinets. The module supports system for record and viewing of the saved templates (constructions).The already saved templates can be loaded again at any time. It is recommendatory to create templates for the most frequently used constructions. You can create and save an icon to the template for preview. The icon saves in a folder C:\acad_pic\SHKAF_YGLOW_SHABLONI under a name of the painted template. The templates open directly from the module Insert units (if they have a saved icon. The pictures - buttons for them loading are placed in the right end of the form) or from the concrete module for generating of polyelement units. Generate cabinet case - The option is active by default. If the option is not selected, you will receive a worktop with sink or worktop only. They, subsequently, can be added to cabinet created by module Cabinet. Each cabinet model (chamferred or with a corner) can be base and wall. The kind of the cabinet defines its design, availability of rails and their position. For example, at a design Working L- figurative corner you can specify availability of additional horizontal rails. This option does not exist for model Working L- figurative chamferred The position of back panel is defined depending on the parameter Back panel is back by end panels. If the option is not active, then the back panels are grasped and one vertical rail is added in a corner.When the option is active, the length of back panels decreases from all end panels with value of parameter Distance of back from the external size in cm. in Parameters by default. One vertical rail is added in an internal corner. Depending on the cabinet model (wall or base), are added vertical rails in the top part of backs on length of the end panels (for base cabinet). When the back panel is between the end panels, as thickness of back panels accepts the thickness of material. The construction The bottom and top overlap the end panels or End panels overlap the bottom and top concerns for all kinds of cabinets, irrespective of their applicability. Construction 2 -The option is active for construction End panels overlap the bottom and top. It doesn't work for chamfered cabinets. For Working L- figurative corner cabinet it is active for construction The bottom and top overlap the end panels too. |
|
|
Adds sink-
Adds an corner sink to the generated cabinet. The model of sink
dependson the model of the chosen cabinet (with
a corner or chamferred). Select this
option to add a sink. Preferably after a choice of sink to put worktop
(select an option Generate
worktop and
define its width and thickness). The hole for sink will be
cut
out automatically in a worktop, similar as module Sink cabinet. The
added sink does not generate automatically element nomenclature for the
purposes of price formation. Position of sink from a cabinet back panel - Defines a sink position in direction of an external corner or chamferred part |
Main page