Furniture design
software DESIGN SINTEZ
Correction
of unit
|
The operation is intended for correction of the generated
units in the current project (modules Cabinets, Base
cabinets, Sink cabinets, Corner cabinet, Angular stands , Doors (all models) and module Blinds - curtains and Additional elements. The work with the module includes 2
basic actions:
1. The
button Unit name
- select a unit from the drawing, which characteristics you want to
change. The pressing of the button hides the form and returns you in
the drawing to specify a unit on its contour lines.
2 .If you have specified unit correctly, press the button Loads unit for correction.
The operation will load the program module generating appropriate kind
of the chosen unit. You can change all parameters in the form for
generating. To set the corrections in unit, click on the button Create in the
module. For cancel of correction close the window.
|
When loading the module
remembers the last edited cabinet (if it's created by modules Cabinet or Sink cabinet) until you select a new unit using the button
Unit name. The purpose of this is the
faster and easier editing of cabinets for large drawings in which the selection
of the cabinet is difficult because of the big number of units in
them.
Generated units without element
nomenclatures -
The button opens the list of all generated units in the drawing which
have not created element nomenclatures. Select unit and press the
button Loads
unit for correction. Check an option Create element
nomenclature in the opened form and generate it
again. Press the button again to close the list.
Automatic edition of all units in
the list - Opens
automatically all modules,which has generated units from the list and
pregenerates them with element nomenclatures. For the units,that are
generated by module
Additional elements (with unit identifier TA), stops
the generating for entering of the nomenclature name and unit
of measure. The operation don't correct Cornices and Profiles.
Main page DS User's
guide
|