Kitchen - step by step

Summary description

1. Open new empty drawing.
2. Save the new job under a user name.  Press the button  from Manager of operations and commands. Enter the name of the new folder and press the button Create new folder . Select it in the list and enter the name of the new subfolder to it. Press Create a new subfolder. Enter the drawing user name in the new subfolder and press  Save a job. 

3. Open operation Room generating (icon  ) from Manager of operations and commands. Choose a room model Floor and back. Enter room sizes:  Length= 300cm, Depth=  350cm and Height= 280. Press the button Create to generate the room.

4. Bottom cabinets-Generate the lower row of cabinets from the left to the right (i. e. from Cabinet 1).Start operation Insert units (press the icon  from Manager of operations and commands. In section Generating of multielement unit select Cabinet and press Open. 

   • Cabinet 1 -With icon    load the list with templates and from group Kitchen cabinets (by double clicking the left mouse button) choose template DS_bottom_cabinet_1_shelf. Press button Set and in the main dialogue form of the module press button Create.  In the job specify with left mouse button the left corner of the room.The unit automatically will stand in the room perimeter.
   • Cabinet 2 -Creates from module Cabinet. Load again the list with templates. Load template DS_sink_cabinet from group Kitchen cabinets. Press button Set and in the main dialogue form of the module, press button Create. In the job specify with left mouse button
     
     the  insertion point  of the cabinet; that point must be the back right point of the previous cabinet (Cabinet 1).
   • Cabinet 3- It generates like Cabinet 2, but here you have to load template DS_bottom_cabinet_2_drawers .


5. Insertion of a horizontal worktop with sink - Open module Sink cabinet. Select template DS_sink_and_worktop. Press the button Create and choose the back left point of the first cabinet.

6.  Wall panel – in this case the value for the worktop depth is its height.

   Start module Worktop from Menager of operations and commands with button  . Choose Rectangular from two points ( pressing on the image). The current choise will write above the images. Enable the option Wall panel.

   We'll use the automatic putting ,as the worktop is linear. Choose option Automatic. Press the button Cabinet and with the left mouse button choose Cabinet 1. After that in the same way choose the last cabinet in the row - Cabinet 3. After you have chosen the first and the last cabinet, press button Create.

7. Wall cabinets - Start again operation Insert units from Menager of operations and commands .Open module Cabinet.

   • Cabinet 4 - Load template DS_kitchen_cabinet_1_shelf.In the job define with the left mouse button the upper left corner of the room- the insertion point of the cabinet.
   • Cabinet 5 - Load template DS_kitchen_cabinet_1_shelf. In the job define with the left mouse button the insertion point of cabinet - the back right point of the previous cabinet.
   • Cabinet 6 - Load template DS_kitchen_cabinet_1_door. In the job define with the left mouse button the insertion point of the cabinet - the back right point of the previous cabinet.

8.  Attachment of doors and fronts to the cabinets in the job - The doors and fronts are put with module  Group addition and deleting of units. It activates from Menager of operations and commands, button  . 

   • Cabinet 1- Press the button Cabinet and select with the left mouse button in the drawing  that cabinet, to which you are attach doors. In that case- Cabinet 1.Use its rails to orientate.After that press the button 2 Next Doors - . In the dialog that opens choose door model D1 (press left mouse button on its image).Press button Generate door.The doors are added and you return in the form for doors attaching.
   • Cabnet 2-In the same way as Cabinet 1, but you have to choose Cabinet 2  in the drawing.
   • Cabinet 3 – Press the button Cabinet and select in the drawing Cabinet 3.After that press the button  . Press the button Add units.  In the dialog that opens choose door model D1 (press left mouse button on its image).Press button Generate door.

   • Cabinet 4 – In the same way as Cabinet 1 and Cabinet 2, but in the job you have to select Cabinet 4. Press the button Add units.In the dialog that opens choose door model D1 (press left mouse button on its image).Press button Generate door.

   • Cabinet 5 – Press the button Cabinet and choose Cabinet 5. Press the button . After that press the button Add units. In the dialog that opens select door model D1 (press left mouse button on its image). Press button Generate door.

   • Cabinet 6 -  Press the button Cabinet and select Cabinet  6. Press the button . After that press the button Add units. In the dialog that opens choose door model D1 (press left mouse button on its image).Press button Generate door.

9.  Handles insertion - 

10. Select in the list that doors to which you will attach horizontally handles.Choose handle model in the menu with non-standard units and press Adds units. Use CTRL key to choose all needed doors together. Hold the key and specify  the doors you want. If it is necessary,correct manually their position (OSNAP must be off). It is recommended the button ORTHO to be switched on. The vertical handles are putted in analogous way.

Note:  Manager of operations and commands activates by right mouse button on the working screen.

Main page     DS User  guide